Airthings, the Norway-based tech company, has introduced the Wave plus smart radon, CO2 and TVOC detector into the UK market.
Air quality Monitor
We’re all much a lot more aware of the risks of poor air quality these days so monitors like this are becoming of interest to many.
The Wave plus is a 12cm diameter x 3.6 cm high smoke-detector-look-alike that’s powered by batteries and can be mounted on the wall, ceiling, or a flat surface. A mounting screw is included and the magnetic battery cover cleverly doubles as the bracket.
Its 6 built-in sensors measure CO2, TVOCs (total volatile organic compounds), temperature, humidity, air pressure and the star of the show, Radon.
Radon
What sets the Wave plus unit besides similar sensors is that ability to measure Radon, a radioactive element which under normal conditions is a gas and easily inhaled. According to Wikipedia that indicates it’s “the second a lot of frequent cause of lung cancer, after cigarette smoking”.
Levels of the gas depend on your local geology and can change around atmospheric conditions too. You can check out a UK Radon Map for an idea of levels in your area and Airthings is building its own map too.
នៃ
Connectivity
The Wave plus uses Bluetooth low energy to fire off its measurements across to your mobile app, and from there, up to the Cloud. Not having a power hungry Wi-Fi chip on board indicates it can be battery powered and Airthings say the 2 AA cells (included) must supply around 16 months of use before they need to be replaced.[Update – Batteries lasted around 11 months before syncing became unreliable and they needed replaced, even though they still showed as 42% in the dashboard]
RELATED: Airthings Wave tiny smart indoor Air quality MonitorRELATED: Eve room 2nd Gen indoor Air quality MonitorRELATED: Foobot is Your smart home Air quality Monitor
However, not having WiFi built-in also indicates that you can’t easily check on the device when you are away from home as it only updates when your phone is within Bluetooth range. We asked Airthings if there’s anyway around this and they told us…
You can setup a phone or a table with the app running in foreground. This will sync data to Airthings cloud and make sure you are up to data where you are.
It’s not very convenient having to leave your iPad or similar at home functioning as a Bluetooth to WiFi bridge though. then we observed their FAQ also mentions the on board ‘Airthings SmartLink’ and we asked the company what this was…
Airthings SmartLink is a protocol for long-range wireless communication, developed by Airthings. It is based on the Sub-1 Ghz communication protocol and it is created for long-range robust connectivity. It connects your device to our Hub which makes your data available remotely. However, it is not available to consumers ideal now.
So it sounds like a hub may be available in the future that will bridge this unit to WiFi.
ការបហ្ចូលក្នា
On the integration side, the Wave plus can be voice control by Amazon Alexa and Google Assistant.
In addition it can connect to IFTTT for some beneficial recipes and notifications too.
Reporting
Measurements are recorded every 5 minutes for each sensor, except for Radon which is logged once every hour. If you are beside the unit then you can wave your hand in its vicinity and the LED light ring on top will glow briefly in Green, Amber or Red in a traffic light system to show your air quality.
Most users will look at their date from the complimentary Airthings mobile apps (Android or iOS). The app feels a bit light on detail though and is a little discouraging because you can’t see the time that height readings occur on the graphs.
In addition to the mobile apps a complimentary web dashboard is also supplied for a a lot more in-depth look at your data and this uses a much a lot more satisfying experience. Hovering your mouse on the graphs supplies the day, date, time and measurements for that point.
One of the most significant things we found in the first week was the build up of CO2 in our bedroom during the night.
In the first few days we also observed the VOC detector mostly complained when something was sprayed in the room with the largest red spikes normally following an air freshener or similar.
According to Airthings the average global outdoor radon level ranges between 5-15 Bq/m3 and you can read a lot more about what Radon levels indicate in this blog post.
A terrific feature is the ability to export your sensor readings to CSV file (actually, semi-colon delimited). AT tell us there’s no limit to how far back you can go, so you can download all your readings ideal back to the start. once you have all your data you are complimentary to analyse and graph it any way you like.
Although the Airthings Wave plus is an indoor Air quality (IAQ) detector, the dashboard also shows an outside air quality score based on your location. Yoអ្នកអាចជ្រើសរើសទីតាំងឯកតារបស់អ្នកដោយដៃនៅលើផែនទីដូច្នេះវាមិនលះបង់អាសយដ្ឋានពិតប្រាកដនៃផ្ទះរបស់អ្នកទេ។
បូកសរុប
ការប្តូរដែនធ្លប់បានប្រាប់យើងថាឧបករណ៍ចាប់សញ្ញាកាន់តែយូរត្រូវបានតំឡើងហើយការអានកាន់តែត្រឹមត្រូវរបស់អ្នកកាន់តែត្រឹមត្រូវ។
ឧបករណ៍រាវរកកាំរស្មីអំបូរត្រូវបានបង្កើតឡើងដើម្បីតាមដានការប៉ះពាល់រយៈពេលវែងរបស់អ្នកទៅរ៉ាឌីន។ ការមានលទ្ធភាពតាមដានកម្រិតរ៉ានិទាររបស់អ្នកជាបន្តបន្ទាប់ផ្តល់ឱ្យអ្នកនូវការយល់ដឹងកាន់តែច្បាស់អំពីចំនួនអ្នកត្រូវបានលាតត្រដាងយ៉ាងខ្លាំងហើយអ្វីដែលអ្នកមានហានិភ័យរបស់អ្នកបើប្រៀបធៀបនឹងការធ្វើតេស្តរយៈពេលពីរថ្ងៃ។ Radon ប្រែប្រួលខ្លាំងណាស់សូម្បីតែពេញមួយថ្ងៃនេះ, ពីការកសាងរហូតដល់សាងសង់នៅក្នុងតំបន់តែមួយនិងសូម្បីតែពីបន្ទប់មួយទៅបន្ទប់មួយនៅក្នុងផ្ទះមួយនៅក្នុងផ្ទះមួយ។ នេះបង្ហាញថាមានតែវិធីសម្រាប់អ្នកដើម្បីដឹងថាតើរ៉ាដិនគឺជាគ្រោះថ្នាក់ពិតប្រាកដគឺត្រូវមានឧបករណ៍ចាប់ដែលជាបន្តបន្ទាប់កម្រិតរ៉ាអុងរបស់អ្នកជាបន្តបន្ទាប់ហើយជួយឱ្យអ្នកមានការប្រែប្រួលដែលជៀសមិនរួច។
អ្នកត្រួតពិនិត្យក្រុមហ៊ុន Amazon មួយចំនួនហាក់ដូចជាមានបញ្ហាជាមួយអង្គភាពនេះជាពិសេសជាមួយនឹងការធ្វើបច្ចុប្បន្នភាពកម្មវិធីបង្កប់។ ទោះយ៉ាងណាបញ្ហានេះហាក់ដូចជាត្រូវបានដោះស្រាយនៅពេលដែលអង្គភាពរបស់យើងបានធ្វើឱ្យប្រសើរឡើងដល់កម្មវិធីបង្កប់ថ្មីប្រហែលជា 2 សប្តាហ៍ក្នុងការធ្វើដោយឥតខ្ចោះ។ យើងក៏បានឃើញការធ្វើបច្ចុប្បន្នភាពកម្មវិធីជាច្រើនក្នុងខែដែលយើងមានអង្គភាពផងដែរដូច្នេះការអភិវឌ្ឍហាក់ដូចជាសកម្មខ្លាំងណាស់។
ប្រសិនបើមានឧបករណ៍ចាប់សញ្ញាកាបូនម៉ូណូអុកស៊ីតនៅអង្គភាពនេះវាអាចជាអ្នកត្រួតពិនិត្យផ្លូវអាកាសតែមួយគត់ដែលបុគ្គលម្នាក់ៗនឹងត្រូវការ។ ប្រសិនបើអ្នកមិនត្រូវការឧបករណ៍ចាប់សញ្ញាទាំង 6 នៃរលកបូកហើយគ្រាន់តែទាក់ទងនឹងរ៉ាឌីននោះរលកធម្មតាប្រើសន្សំសំចៃសន្ធឹកសន្ធាប់។
សម្រាប់ពេលនេះប្រសិនបើអ្នកចង់បានផ្នែកមួយនៃការត្រួតពិនិត្យគុណភាពខ្យល់របស់ផ្ទះឆ្លាតវៃឆ្លាតបំផុតនៅជុំវិញនោះមើលទៅមិនលើសពីខ្យល់ផ្លោងខ្យល់បូក។
មានពីក្រុមហ៊ុន Amazon
ការលក់ដុរ
1.241 ការពិនិត្យឡើងវិញ
Airthings 2930 Wave Plus Sm វៃឆ្លាត CO2 និង TVOC របស់ TVocs ជាមួយនឹងសីតុណ្ហភាព
រង្វាន់ឈ្នះពានរង្វាន់: រលកអេដភីគឺជាម៉ូនីទ័រដែលមានគុណភាពខ្យល់ឆ្លាតវៃក្នុងផ្ទះដែលទទួលបានពានរង្វាន់ជាមួយនឹងការរកឃើញរ៉ាឌីន។ (ការច្នៃប្រឌិតដ៏ល្អបំផុតរបស់ទស្សនាវដ្តី Time 2019
លទ្ធផលរ៉ាឌីនដែលអាចទុកចិត្តបាន: នៅពេលដែលកម្រិតរ៉ាម៉ុនផ្លាស់ប្តូររាល់ថ្ងៃការវាស់វែងរយៈពេលវែងជាបន្តបន្ទាប់គឺចាំបាច់។ វែកញែករលកបូកនឹងនីតិវិធីរ៉ាឌីនមានភាពត្រឹមត្រូវនិងអាចទុកចិត្តបាន
ឧបករណ៍ចាប់សញ្ញាខ្យល់ស្អាត: រ៉ាឡុងកាបូនឌីអុកស៊ីត (ឧស្ម័ង) ជាតិពុលនិងសារធាតុគីមីសរុប) សំណើមសីតុណ្ហភាពសីតុណ្ហភាពមានភាពមើលឃើញពេញលេញទៅក្នុងកត្តាខ្យល់ក្នុងផ្ទះដ៏សំខាន់ចំនួន 6 ។
£ 187.36
ទទួលបាននៅលើក្រុមហ៊ុន Amazon
AirThings.com
គុណភាពខ្យល់ – លក្ខណៈបច្ចេកទេសឧបករណ៏
ចន្លោះគំរូគំរូ: 5 នាទី
ដំណោះស្រាយឧបករណ៍ចាប់សញ្ញា:
សីតុណ្ហាភាព± 0.1 អង្សាសេ (0.1 អង្សាសេ)
សំណើម± 1%
សម្ពាធ± 0.15hpa
ដោះស្រាយពេលវេលា:
TVOC ~ 7 ថ្ងៃ
CO2 ~ 7 ថ្ងៃ
ព័ត៌មានលំអិត CO2:
ឧបករណ៏ NDIR (អ៊ីនធឺណេតមិនបែកខ្ញែក)
រង្វាស់ជួរ 400-5000 ppm
មិនមែនខាប់ 0 – 85% RH
ភាពត្រឹមត្រូវល្អបំផុត± 30ppm ± 3% ក្នុងរយៈពេល 15 – 35 អង្សាសេ (60 – 95 អង្សាសេ) និង 0-80% អាចឈានដល់វដ្តនៃការតាំងទីលំនៅនៅលើទីតាំងដែលមានការប្រែប្រួលឧស្ម័នធម្មជាតិរបស់ CO2 ក្នុងផ្ទះ Co2 ។
លក្ខណៈបច្ចេកទេសឧបករណ៏រ៉ាឌីន
ការធ្វើគំរូកាំរស្មី: បន្ទប់ចែកចាយអកម្មអកម្ម
វិធីសាស្រ្តនៃការរកឃើញ: អាល់ហ្វាស្ពាន់ធ័រ
ជួរវាស់: 0 – 500 PCI / L
ភាពត្រឹមត្រូវ / ភាពត្រឹមត្រូវ:
បន្ទាប់ពី 7 ថ្ងៃ: σ ~ 10% នៅ 5 PCI / L
បន្ទាប់ពី 2 ខែσσ ~ 5% នៅ 5 PCI / L
ចែករំលែកនេះ:
ដេលតាក់តរ
អិនតតឹក
reddit
LinkedIn
Pinterest7
អ៊ីមែល
រេចីនចាង
whatsapp
អកសរបុម្ក
សន្ដិសុខ
tumblr
តេលេរកាម
ហោប៉ោ
ការធ្វើបច្ចុប្បន្នភាពចុងក្រោយនៅឆ្នាំ 2021-10-04 / តំណភ្ជាប់ / រូបភាពភ្ជាប់ / រូបភាពពី Amazon ផលិតផល API